AUTOMOTIVE WASH AND WAX 213 The best product for hand washing and shining automotive finishes in one easy application.  Gives excellent cleaning, shining, and water beading action.  Low foaming for easy rinseability.  May also be used as a one-step cleaner and wax for use in automatic car washes (it is especially useful in situations where a single pit reclaim system is in operation).  Automotive Wash and Wax 213 becomes a high foaming surfactant system when injected in an air foaming unit at a concentration of 0.5 – 2.0%.  Has excellent beading properties when followed by a water rinse, as well as imparting a dazzling shine to the finish.

TRUCK WASH 417 A highly alkaline, concentrated truck wash for pressure washing or drive-through truck washing systems.  This product should be diluted at least 1 to 25, and may be used at dilutions of 1 to 60.  This product is not for use on automobiles, as it will remove wax and, in some cases, may cause paint damage.  It has superior road film removing properties.

CAR & TRUCK WASH 461 A dark greenish-blue, viscous, car wash with a neutral pH.  Gives rich, thick, long-lasting suds.  Will not remove or dull wax finishes on cars or trucks.  Biodegradable with no phosphates or other alkaline builders.  This product is designed for hand washing cars and trucks, or may be used in automatic car washes.  Very economical.

TRUCK WASH 471 A superior one step truck wash formulation for use with pressure washers.  Will not brown or discolor aluminum, so an acid cleaner is not needed.  Excellent for removing road film.  Does some brightening of aluminum as it cleans.

REVIVE VINYL & RUBBER RENEWER 835 A spray-on or wipe on protectant and restorer for vinyl, rubber, plastic, leather, wood, acrylics and plexiglass.  Provides an unmatched, semi-permanent luster to protect and beautify these surfaces.  Also available in 12 x 1 quart bottles with two trigger sprayers per case. 

ODORLESS PARTS CLEANER 892 An excellent mild solvent degreaser and cleaner.  Absolutely no kerosene smell.  This is a cosmetic grade hydrocarbon, so skin sensitivity is extremely low.  Combustible liquid, but flash point is above 180oF., so it may be used as a safety solvent.  Does not require red flammable warning label.  Will remove tar, grease, oil, and grime build-up.  Would be an excellent replacement for mineral spirit or chlorinated type solvents where odor or ventilation is presently a problem.  Best selling points are absolutely no smell and relatively economical, and high flash point.  Available only in 55 gallon drums.

CAR WASH CW-50 is a revolutionary new product for cleaning an extremely wide range of contaminants and surfaces effectively and safely with minimal deleterious effects on the environment.  A very mildly alkaline pH of 9.25 provides the safest effective product possible.  CW-50 contains neither caustics nor acids, yet replaces harsh acid-alkaline two step processes in car washing with superior cleaning results as compared to its more dangerous competitors.  CW-50 is an aqueous based product containing absolutely no solvents or VOC’s.  TW-50 effectively removes dirt, grime, road film, gasoline and diesel fuels, lubricants, machine oils, and silicones from nearly any surface with no harm to the surface cleaned.  CW-50 is extremely concentrated, thus making it highly cost effective since it is used at such large dilution ratios.  Since CW-50 works better and quicker than its harsher competitors, better cleaning results and valuable labor savings are achieved.

CAR WASH CX-50 is super strength car wash with a higher pH (12.5) and enhanced solvent cleaning.  CX-50 breaks the electrostatic bond between road film and the metal surface of the car.  CX-50 contains no acids, caustics, petroleum-based solvents, or phosphates.  Superior cleaning is achieved with less labor.  CX-50 effectively removes road film, exhaust soot, dirt, grime, diesel fuel, and insects from automobile surfaces without harming these surfaces.

DRIVEWAY CLEANER DC-9 is a safe effective, highly concentrated driveway cleaner.  DC-1 quickly cleans oils and greases from all driveway surfaces.  DC-1 is non-toxic and contains no solvents or caustics.  DC-1 is only very mildly alkaline, so it is safe to use in the presence of children and pets.  Just apply, let soak for a minimum of one hour (overnight if possible), and hose off.  Hot water or a pressure washer improve performance, but is typically not necessary.

DRIVEWAY CLEANER DX-12 is a higher pH (12.5) driveway cleaner with added solvent power designed to clean the very heaviest, built-up grease and oils from driveway surfaces.  DX-1 contains no caustics, acids, or phosphates.  Simply apply DX-1, let soak for one hour, and hose or pressure wash residue off the driveway.

MARINE CLEANERS MC-50 is a safe, highly concentrated marine cleaner designed to be diluted at a 50 to 1 ratio with water.  MC-50 is an extremely effective cleaner for hulls, decks, engines, and bilges.  MC-50 contains no caustics, solvents nor VOC’s, is nonflammable, and has a very mild pH of 9.25, thus making it a very safe cleaner for personnel and soft metals such as aluminum, brass, bronze, and copper.  MC-50 works by breaking the electrostatic bond between oils and metal surfaces and washing away these contaminants. MC-50 does not utilize emulsion chemistry, so oil/water separation will not present a problem.

MARINE CLEANERS MX-12 is a super-duty, higher pH (12.5), solvent-fortified marine cleaner designed to clean the very toughest, nastiest, greasiest, dirtiest surfaces.  Mx-12 may be used at a 50 to 1 water ratio in pressure washers and a variety of other equipment.  MX-12 contains no petroleum, chlorinated or terpene solvents, or phosphates.

MARINE CLEANERS MX-50 is a 100% active, super concentrated cleaner utilizing terpene chemistry along with a blend of detergents, wetters, emulsifiers, and surfactants.  Used at 2% (50 to 1 ratio) with hot water, MX-50 will clean the absolutely dirtiest, nastiest, engines, bilges, decks, and the inside of tanks.  The pH of a 2% solution of MX-50 will be between 7.0 and 8.0

PERFECT SOLUTION received its name because it eliminates the objections associated with typical cleaner/degreasers.  It contains no caustics, acids, butyl cellosolve (a suspected carcinogen), phosphates, VOC’s phenols, or SARA Title III Reportable ingredients.  Perfect Solution is environmentally friendly, being approximately 90% biodegradable in 28 days (beating the international standard of biodegradability by 50%).  Perfect Solution provides superior oil emulsification and cleaning on a wide variety of soils, grimes, oils, greases, and stains.  The safe way to clean quickly and effectively.  Good for use on oil slicks, decks, tanks, engine rooms, and bilges.

TANK CLEANER TC-50 is a unique, 100% active blend of surfactants, emulsifiers, and naturally occurring terpenes designed to safely remove carbon based products, vegetable oils, lubricants, oil additives, synthetic coatings, polymeric binders, high molecular weight complex compounds, grime, and many other contaminants that are difficult to remove even with petroleum solvent based cleaners.  TC-50 contains no chlorinated solvents, petroleum solvents, alkalies, caustics, or phosphates.  TC-50 is designed to be used in various hot water wash systems at a 1 to 10% emulsion in water, with 2% level being the norm.  TC-50 breaks the surface bonding and emulsifies and/or suspends the contaminants for disposition without redeposition.  TC-50 typically cleans the toughest contaminants with a one-step wash in hot water.

TRUCK WASH TW-50 is a revolutionary new product for cleaning an extremely wide range of contaminants and surfaces effectively and safely with minimal deleterious effects on the environment.  A very mildly alkaline pH of 9.25 provides the safest effective product possible.  TW-50 contains neither caustics nor acids, yet replaces harsh acid-alkaline two step processes in truck washing with superior cleaning results as compared to its more dangerous competitors.  TW-50 is an aqueous based product containing absolutely no solvents or VOC’s.  TW-50 effectively removes dirt, grime, road film, gasoline and diesel fuels, lubricants, machine oils, and silicones from nearly any surface with no harm to the surface cleaned.  TW-50 is extremely concentrated, thus making it highly cost effective since it is used at such large dilution ratios.  Since TW-50 works better and quicker than its harsher competitors, better cleaning results and valuable labor savings are achieved.

TRUCK WASH TX-50 is super strength truck wash with a higher pH (12.5) and enhanced solvent cleaning.  TX-50 breaks the electrostatic bond between road film and the metal surface of the truck.  TX-50 contains no acids, caustics, petroleum-based solvents, or phosphates.  Superior cleaning is achieved with less labor.  TX-50 effectively removes road film, exhaust soot, dirt, grime, diesel fuel, and insects from truck surfaces without harming these surfaces.

PEAK PERFORMANCE & FUEL MIZER PRODUCTS

PMT-100, LUBRICANT ENHANCER, ALL PURPOSE LUBRICANT TREATMENT, This product utilizes Polarized Molecular Technology (PMT). PMT-100, being negatively charged, forms a strong bond with positively charged machined metal surfaces. PMT-100 provides a protective cushion between metal-to-metal surfaces. Lubricity is greatly improved, thus reducing friction and heat. PMT-100 is state-of-the-art technology for protection of all moving mechanical parts. Over the road vehicle engines, transmissions and drive train, Food, marine & rail applications, Construction equipment power takeoffs, hydraulic systems, & gear boxes, Manufacturing equipment hoists, extruders, presses, & motor drives, PMT can also be used but is not limited too pumping and hydraulic systems. Product is packaged in convenient easy pour bottles.

PMT-200, POWER OIL CRANKCASE OIL TREATMENT,  Reduces vibration & noise, Increases engine life, Improves power, Reduces oil consumption, Improves oil film, Increase seal life, Removes oxidation deposits, Reduce oil operating temperature, Inhibits corrosion. PMT-200 is designed for gasoline powered vehicles. Product is packaged in convenient easy pour bottles.

PMT-300, POWER SHIFT, AUTOMATIC TRANSMISSION TREATMENT, Reduces gear and hydraulic noise, Increases transmission life, Improves power, Reduce oil, consumption, Improves oil film, Increases seal life, Smoother shifting, Reduces oil operating temperature

PMT-400, POWER TRAIN REAR AXLE/MANUAL TRANSMISSION TREATMENT, Reduces gear and hydraulic noise, Increases gear box life, Improves power, Reduces oil leaks, Increases seal life. PMT-400 is designed for gasoline or diesel powered vehicles. Product is packaged in convenient easy pour bottles.

FSC-100, GAS FUEL SYSTEM CLEANER 9,000, Additive for fuel system (injectors, fuel pumps, carburetors, manifolds, and fuel lines), Additive for combustion system (spark plugs, valves, pistons, and cylinder walls), Top tier additive, 100% synthetic, Latest, technology available today, Fast acting, Add FSC-100 to gas tank every 9,000 miles. Reduce or eliminate knocking, Return fuel system to peak performance, Improve “cold starting”, Reduce stalling at intersections, Improve fuel, performance, Clean fuel injector ports, Increase combustion efficiency, Improve regulated emissions, Improve acceleration. FSC-100 is the only fuel cleaning product on the market that cleans the combustion chamber. Product is packaged in convenient easy pour bottles.

FSC-150, GAS FUEL SYSTEM CLEANER 3,000 Additive for fuel system (injectors, fuel pumps, carburetors, manifolds, and fuel lines), Additive for combustion system (spark plugs, valves, pistons, and cylinder walls), Top tier additive, 100% synthetic, Latest, technology available today, Fast acting, Add FSC-150 to gas tank every 3,000 miles. Reduce or eliminate knocking, Return fuel system to peak performance, Improve “cold starting”, Reduce stalling at intersections, Improve fuel, performance, Clean fuel injector ports, Increase combustion efficiency, Improve regulated emissions, Improve acceleration. Product is packaged in convenient easy pour bottles.

FSC-200, DIESEL FUEL SYSTEM CLEANER SUMMER  Increases fuel flow at low temperatures, Reduce fuel cloud and pour point, Deicer prevents ice crystals, from forming in fuel, Adds lubricity to fuel, Summer add FSC-200 1 gallon to, every 4,200 gallons of diesel fuel. Superior injector cleanliness, Reduce, exhaust emissions, Reduce combustion noise, Improve fuel economy, Improve, corrosion protection, Reduce engine wear, Contains no sulfur or, metals, Increases octane value up to 8 points, Prevents return of deposits.

FSC-250 DIESEL FUEL SYSTEM CLEANER WINTER add FSC-250 1 gallon to every 750 gallons of diesel fuel. Winter operation presents additional challenges.  Engines are hard to start.  Clouds of white smoke increase poor combustion and idle speeds are hard to maintain. FSC-250 will correct these problems.  Improved octane makes the engine easier to start.  Flow improves and heavy wax modifiers make the fuel easier to pump at lower temperatures. Deicer prevents water crystals from forming.